-
13:00
Numerical Evaluation of RANS Turbulence Models for Flow-Accelerated Corrosion
-
13:01
Fuel Temperature Coefficient of Reactivity in Triga Mark II Reactor in Slovenia
-
13:02
Elastic Polymer Shielding: Integrating Zinc Oxide for Enhanced Radiation Protection
-
13:03
Preliminary Thermal-Hydraulic Assessment of Iron-Based ATF Claddings with Reduced Thickness
-
13:04
Environmental Assessment of Nuclear Waste Management Strategies in Saudi Arabia: Toward a Sustainable Energy Transition
-
13:05
Radiological impact of Cs-137 release from the near surface disposal facility at Serpong Nuclear Center to environment: Effect of compacted bentonite layer
-
13:06
Advancing Pool Scrubbing Simulations: from Traditional to AI Methods
-
13:07
Exploring thermal hydraulics characteristics of hybrid TiO₂-Cu/Water nanofluid in a triangular array of PWR subchannel using ANSYS Fluent
-
13:08
Safety assessment of interim disposal facility in KFUPM area for low- and intermediate-level radioactive waste (LILW) repository using RESRAD-OFFSITE code
-
13:09
Influence of Buoyancy in a Mixed Convection Liquid Metal Flow for a Horizontal Channel Configuration
-
13:10
Comparative Study of the Accuracy and Applicability of AHFM-NRG through RANS Turbulence Based Models for Low-Prandtl Fluids
-
13:11
First Draft of The Poster for Team-G ,(Numerical Prediction of Liquid Metal Thermal-Hydraulics in Backward Facing Step for Advanced Nuclear Reactor Design)
-
13:12
Designing a Full Implementation Plan for the First Fusion Reactor in Saudi Arabia
-
13:13
Development of an Automated Remote System for Calibration Data Acquisition of Radiation Survey Instruments in Shielded Facilities
-
13:14
Salt Selection Study For Molten Salt Reactor Design In Saudi Arabia's Energy Mix
-
13:15
Experimental Evaluation of Thermophysical Properties of Graphene Nanofluids for Emergency Cooling in BWRs
-
13:16
Radioactivity in Camel Milk in Saudi Arabia
-
13:17
Reactor Response to Step Reactivity Changes
-
13:18
Modeling Impact of Roughness and Wettability on Critical Heat Flux Predictions
-
13:19
Full Implementation Plan for the First Fusion Reactor in Saudi Arabia
-
13:20
Boiling Regime
-
13:21
Thermal investigation of turbulent flow inside a square duct using heated foil sensors
-
13:22
Thermal fatigue in T junction dead leg flows
-
13:23
Nuclear Steam Cogeneration Industrial Growth
-
13:24
Characterizing Fluid Flow Regimes with Proper Orthogonal Decomposition
-
13:25
PREDICTION OF FLOW AND HEAT TRANSFER IN A MOLTEN CORIUM POOL
-
13:26
Techno-Economic Analysis of Nuclear-Based Hydrogen Production: A Case Study Approach Using HEEP
-
13:27
Monte Carlo Simulation for Performance Analysis of a ²⁵²Cf-Driven PGNAA Landmine Detection and Identification System
-
13:28
Loss of Flow Transient Analysis of a Small Modular Reactor during Normal Operation
-
13:29
Feasibility Study of Accelerator-Based Boron Neutron Capture Synovectomy (BNCS) For Treating Rheumatoid Arthritis
-
13:30
Performance study of spent radioactive resin conditioning using cementitious binders incorporating clay
-
13:31
Towards a Self-Reliant Nuclear Future: An Analysis of Saudi Arabia's Potential in Localizing Nuclear Power Plant Equipment Production
-
13:33
Numerical Prediction of Mixed Convection Flow Regime in Liquid-Metal Fast Cooled Reactor Design
-
13:34
A Comparative Performance Analysis of Standard RANS Models for Simulating Turbulent Impinging Jet Heat Transfer with Variable Prandtl Number Fluids
-
13:35
Innovative Microreactor For Sustainable And Localized Medical Isotopes Production
-
13:36
Bridging Industry and Regulation: A Thorium Separation Initiative for Radioactive Waste Management
-
13:37
Thorium Fuel Designs for Enhanced Performance in Micro Modular High Temperature Reactor
-
13:38
Radiation Attenuation Properties for different Aluminuim Alloys Poster
-
13:39
Assessment of RANS Turbulent Heat Flux Models for High Prandtl Number Fluids Under Mixed Convection Regime
-
13:40
An assessment of URANS turbulent models and predicting thermal mixing and thermal fatigue
-
13:41
Assessment of Numerical Models in Predicting Flow Pulsation in a Closely-Spaced Bare Rod Bundle
-
13:42
Safety Assessment of Interim Disposal Facility in King Fahd University for Petroleum and Minerals (KFUPM) Area for Interim Storage of Low- and Intermediate-level Radioactive waste (LILW)
-
13:43
Impact of Monte Carlo Calculations on Design, Activation and Inventory Analysis, Safety and Radiation Protection of Nuclear Power Plants
-
13:44
Evaluation of microstructural evolution of glassy carbon induced by helium implantation and annealing
-
13:45
Predictive Modelling of Hydrogen Releases from Nuclear Waste Pipelines: A Collaborative Study with Sellafield Ltd
-
13:47
Optimizing Neutronics and Thermal Performance in High-Temperature Gas-Cooled Reactors
-
13:48
Assessment of RANS Turbulent Heat Flux Models for High Prandtl Number Fluids Under Mixed Convection Regime
-
13:49
Thermal Hydraulic Characteristics of Advanced Reactor Fuels: An Analysis of MOX, TRISO, and Metallic Fuels
-
13:50
The role of high frequency intermittent field to control CHF accident in water cooled nuclear reactors
-
13:51
Innovative Radiation Leak Detection and Analysis Using Intelligent Sensors and Spectroscopy.
-
13:52
The Prospect of Using Advanced HALEU & TRISO Fuels in Advanced Nuclear Reactors
-
13:53
Predictive modelling of small scale hydrogen explosion overpressures related to hydrogen releases from nuclear containment systems: A Collaborative Study with Sellafield Ltd
-
13:54
From environmental contamination to policy reform: Radiological impact of unregulated tin-tailing in support of Malaysia’s Nuclear Safety Framework
-
14:09
Enhancing Corrosion Resistance and Nuclear Fuel Salt Chemistry for Structural Integrity in Molten Chloride Salt Fast Reactors
-
14:15
Designing a Digital Twin Framework for a Tokamak Reactor
-
14:20
FINITE NUCLEI PROPERTIES FROM NUCLEAR MATTER EQUATION OF STATE
