Name: THE SECOND SAUDI INTERNATIONAL CONFERENCE ON NUCLEAR POWER ENGINEERING (SCOPE-2)
Start: 2025-11-02T08:00:00+03:00
End: 2025-11-06T18:00:00+03:00
Location: No location set

A Comparative Performance Analysis of Standard RANS Models for Simulating Turbulent Impinging Jet Heat Transfer with Variable Prandtl Number Fluids (in session "Poster")

A Complete Mechanistic Model of Vertical Upward Annular Two-Phase Flow (in session "Thermal Hydraulics")

A Smart Bio-Engineered Spray Using Deinococcus radiodurans for Worker Radiation Protection and Nuclear Waste Transport (in session "Student Competition")

A Sustainable IoT-Based Monitoring Architecture for Radioactive Waste Management Across Its Lifecycle (in session "Student Competition")

A Systems-Theoretic Approach to Dynamic Risk Assessment of Blended Threats in Nuclear Facilities (in session "Student Competition")

A Ten-Year Self-Review of Safety Assessment Framework for Dry Systems under Impact Loadings: Methods and Research Prospects (in session "Fuel Cycle and Waste Management")

Addressing innovation on analysis and management of accidents by international cooperation: the Working Group on the Analysis and Management of Accidents (WGAMA) (in session "Thermal Hydraulics")

Advanced Multi-Objective Optimization of Nuclear Fuel Disposal: A Comparative Study of Exact and Heuristic Algorithms (in session "Student Competition")

Advancing Pool Scrubbing Simulations: from Traditional to AI Methods (in session "Poster")

An assessment of URANS turbulent models and predicting thermal mixing and thermal fatigue (in session "Poster")

An Automatic Soluble Boron Scenario Based on a Sliding Mode Observer During Daily Load Follow Operation in APR1400 (in session "Reactor Physics")

An Economic Evaluation of Hydrogen Production from Small Modular Molten Salt Reactor by Using HEEP (in session "Fusion and Advanced Reactors")

An Optimized Gated Recurrent Unit Deep Neural Network Architecture (in session "Nuclear Materials")

Analysis of Conformational Changes in Calf Thymus DNA Induced by Ionizing Radiation from a 137Cs Source Using UV Spectroscopy and CD Spectroscopy (in session "Student Competition")

Analysis of Fluid Flow Uniformity in Molten Salt Reactor – Repowering using CFD (in session "Student Competition")

Application of Compton Imaging For the Reconstruction Of a Gamma Source in Nuclear Safeguards Activities (in session "Nuclear Applications and Radiation Processing")

Assessing the Role of Pool Scrubbing in WC-SMRs (in session "Safety and Severe Accidents")

Assessment of Numerical Models in Predicting Flow Pulsation in a Closely-Spaced Bare Rod Bundle (in session "Poster")

Assessment of RANS Turbulent Heat Flux Models for High Prandtl Number Fluids Under Mixed Convection Regime (in session "Poster")

Assessment of SPACE Code Prediction Capability for Two-phase Natural Circulation Flow Pressure Drops Limitations and Pathway for Improvements (in session "Thermal Hydraulics")

Assessment of validation metrics for thermal-hydraulic system codes within OECD/NEA ATRIUM project (in session "Student Competition")

Atmospheric Monitoring of Accidental Radioactive Releases and Source Term Reconstruction (in session "Safety and Severe Accidents")

Axial Compression Performance of Concrete Strengthened Steel Structures for Nuclear Structures (in session "Nuclear Materials")

Boiling Regime (in session "Poster")

Bridging Industry and Regulation: A Thorium Separation Initiative for Radioactive Waste Management (in session "Poster")

Bulk Hydrogen Analysis of Cyanogenic Food Plants Using Neutrons for Routine Quality Control (in session "Nuclear Applications and Radiation Processing")

Calculation and Verification of OPAL Research Reactor Neutronics using OpenMC (in session "Reactor Physics")

CFD Modelling for Steam Generator (in session "Thermal Hydraulics")

CFD Study on Smooth Stratified to Wavy Stratified Flow in Horizontal Two-Phase Flows: Diameter-Dependent Scaling Laws and Pressure Drop (in session "Student Competition")

Characterization of Longitudinal electron beam dynamics in a compact S-band Standing Wave (SW) Radio-Frequency (RF) Photoinjector (1.5 cell design) (in session "Nuclear Applications and Radiation Processing")

Characterizing Fluid Flow Regimes with Proper Orthogonal Decomposition (in session "Poster")

Chasing a Fukushima-Daiichi Unit 1 Scenario with MELCOR 2.2 (in session "Safety and Severe Accidents")

Comparative Analysis of Neutronic D-T and Aneutronic p–¹¹B Fusion: Neutron Flux, Material Damage, Activation and Shielding Requirements (in session "Fusion and Advanced Reactors")

Comparative Study of Creep-Fatigue Response in Conventional and LPBF SS316L (in session "Nuclear Materials")

Comparative Study of the Accuracy and Applicability of AHFM-NRG through RANS Turbulence Based Models for Low-Prandtl Fluids (in session "Poster")

Comparative Study of Wick Layer Number and Damage Effects in Microreactor Heat Pipes (in session "Thermal Hydraulics")

Computational Analysis of Turbulence Effects on Flow-Accelerated Corrosion in 90° Elbow Configuration (in session "Student Competition")

Computational Investigation of Flow-Induced Vibration in Nuclear Fuel Rods: Effects of Flow Velocity and Turbulence Models (in session "Student Competition")

Coupled Mass and Heat Transfer in Multiscale Flows Using a Generalized Multiphase Modelling Approach (in session "Thermal Hydraulics")

Criticality and Burnup Analysis of a Generic VVER-1200 for Core Lifetime Prediction Using Hybrid Burnable Poisons using OpenMC and ORIGEN Codes (in session "Reactor Physics")

CrNb Coating System as a Novel Near-Term Accident Tolerant Fuel Solution for Boiling Water Reactors (in session "Student Competition")

Damage Modeling Of Pipe Impact Under Pipe Whip Failure Conditions (in session "Student Competition")

Deep Learning Approach for Accurate Wind Profile Prediction in TRIGA Bandung Site as Safety-Related and Resilience Trustworthy Decision-Making (in session "Student Competition")

Defects Creation in Ionic Fluoride Crystals by MeV Heavy Ions (in session "Nuclear Applications and Radiation Processing")

Delayed and Prompt Gamma Neutron Activation Analysis of Vanadium Soil Sample Using Genie-16 Portable Neutron Generator at KFUPM (in session "Nuclear Applications and Radiation Processing")

Designing a Digital Twin Framework for a Tokamak Reactor (in session "Poster")

Designing a Full Implementation Plan for the First Fusion Reactor in Saudi Arabia (in session "Poster")

Developing polyamide nanofiltration membranes for treating radioactive waste effluents: a review (in session "Fuel Cycle and Waste Management")

Developing Polymer Compounds for Effective Radiation Shielding Using Nuclear Techniques for Medical Applications (in session "Student Competition")

Development and Validation of an OpenMC-Based Neutronic Model of the OPAL Research Reactor for Research and Educational Applications (in session "Fusion and Advanced Reactors")

Development of 10 MW Micro-Nuclear Reactor as Case Study for the Kingdom of Saudi Arabia (in session "Thermal Hydraulics")

Development of a Buoyancy-Driven Incompressible Schrodinger Flow Algorithm for Inviscid Flows (in session "Thermal Hydraulics")

Development of a Novel Composite Shielding Material for Protection Against Neutron and Gamma Radiation (in session "Nuclear Materials")

Development of Advanced Ceramics in Support of Radioactive Waste Management (in session "Fuel Cycle and Waste Management")

Development of an Advanced Open-Source Nuclear System Analysis Code Based on a Fully Implicit Two-Fluid Model (in session "Thermal Hydraulics")

Development of an Automated Remote System for Calibration Data Acquisition of Radiation Survey Instruments in Shielded Facilities (in session "Poster")

Development of an Educational Monte Carlo Simulation App with Real-Time Visualization of Nuclear Particle Transport (in session "Education and Training")

Development of MCNP-GA Hybrid Model for Enrichment Evaluation of Nuclear Material (in session "Nuclear Applications and Radiation Processing")

Development of QUANTRA as Educational Tool for Nuclear Reactor Simulation Using Deterministic Methods with Standard and Quantum-Inspired Algorithms (in session "Education and Training")

Disposal at the end stage of nuclear waste management (in session "Keynote Speech")

Dissolution Behavior of Unirradiated MOX Fuel in the Presence of Metallic Iron and Its Corrosion Products Magnetite and Chukanovite (in session "Fuel Cycle and Waste Management")

Dynamics of the Molten Salt Fast Reactor Through Parametric Dynamic Mode Decomposition (in session "Reactor Physics")

Effect of Pellet-Cladding Interaction on the Structural Behavior of Spent Nuclear Fuel Cladding (in session "Student Competition")

Elastic Polymer Shielding: Integrating Zinc Oxide for Enhanced Radiation Protection (in session "Poster")

Enabling Extended Space Missions with Advanced Liquid-Core Nuclear Thermal Rocket (in session "Fusion and Advanced Reactors")

Energy substitution dynamics: a binary logistic model for fossil and non-fossil competition (in session "Nuclear Applications and Radiation Processing")

Engineering Amidoxime-Grafted MOF-808 for Rapid and Efficient Uranium Extraction from Seawater (in session "Fuel Cycle and Waste Management")

Engineering Challenges in Nuclear Electric Propulsion for Deep Space Missions (in session "Fusion and Advanced Reactors")

Enhancing Corrosion Resistance and Nuclear Fuel Salt Chemistry for Structural Integrity in Molten Chloride Salt Fast Reactors (in session "Poster")

Enhancing the ionized radiation shielding, mechanical, and structure features of bismuth-reinforced tin-based alloys: Comparative investigation (in session "Student Competition")

Environmental Assessment of Nuclear Waste Management Strategies in Saudi Arabia: Toward a Sustainable Energy Transition (in session "Poster")

Estimation of Neutron Flux Distribution in Bandung TRIGA 2000 Reactor Core Components: A Focus on Biological Shielding and its Implications for Decommissioning Planning (in session "Research Reactors")

Evaluating Biaxial Creep and Anisotropic Deformation of Nb-Containing Zirconium Alloys for Nuclear Cladding Applications (in session "Nuclear Materials")

Evaluating the Potential of X-Ray Radiation as a Control Method for Red Palm Weevil (Rhynchophorus ferrugineus) Larvae (in session "Nuclear Applications and Radiation Processing")

Evaluation of a Small Subcritical Hybrid Reactor for Transuranic Transmutation (in session "Student Competition")

Evaluation of microstructural evolution of glassy carbon induced by helium implantation and annealing (in session "Poster")

Evaluation of Reflector Drums as an Alternative Control Mechanism in PWR-based Small Modular Reactors (in session "Student Competition")

Evaluation of the Use of the Moving Particle Semi-implicit Method in Simulating the Centralized Sloshing Phenomenon SFR (in session "Student Competition")

Evaluation of the Use of the MPS Method in Simulating the Centralized Sloshing Phenomenon in an SFR Reactor (in session "Student Competition")

Evaluation of U3Si2 as an alternate Accident Tolerant Fuel for Extended Cycle Operation in APR-1400 (in session "Reactor Physics")

Experimental Evaluation of Thermophysical Properties of Graphene Nanofluids for Emergency Cooling in BWRs (in session "Poster")

Exploring thermal hydraulics characteristics of hybrid TiO₂-Cu/Water nanofluid in a triangular array of PWR subchannel using ANSYS Fluent (in session "Student Competition")

Exploring thermal hydraulics characteristics of hybrid TiO₂-Cu/Water nanofluid in a triangular array of PWR subchannel using ANSYS Fluent (in session "Poster")

Exploring thermal hydraulics characteristics of hybrid TiO₂-Cu/Water nanofluid in a triangular array of PWR subchannel using ANSYS Fluent (in session "Student Competition")

Fault Tree-Based Reliability Modeling for Passive Emergency Core Cooling System of Small Modular Reactors (in session "Safety and Severe Accidents")

Feasibility Assessment of Cl-37 Enrichment Reduction in a Long-Life Maritime Molten Salt Fast Reactor (in session "Reactor Physics")

Feasibility Study of Accelerator-Based Boron Neutron Capture Synovectomy (BNCS) For Treating Rheumatoid Arthritis (in session "Poster")

Final Design and Safety Analysis of the 30 MWth HTGR-POLA Reactor (in session "Research Reactors")

FINITE NUCLEI PROPERTIES FROM NUCLEAR MATTER EQUATION OF STATE (in session "Poster")

First Draft of The Poster for Team-G ,(Numerical Prediction of Liquid Metal Thermal-Hydraulics in Backward Facing Step for Advanced Nuclear Reactor Design) (in session "Poster")

Fission Product Release Modeling in MELCOR: an Extension of the Validation (in session "Safety and Severe Accidents")

From environmental contamination to policy reform: Radiological impact of unregulated tin-tailing in support of Malaysia’s Nuclear Safety Framework (in session "Poster")

From Waste to Shield: High-Performance X-ray Protection with Recycled Electrical Board/LDPE Composites (in session "Nuclear Applications and Radiation Processing")

Fuel Temperature Coefficient of Reactivity in Triga Mark II Reactor in Slovenia (in session "Poster")

Fukushima: Knowns, unknowns and lessons learned for safety (in session "Keynote Speech")

Full Implementation Plan for the First Fusion Reactor in Saudi Arabia (in session "Poster")

GAMOWS (Gadjah Mada Monitoring Early Warning System): An Early Warning System Module with Intelligent Evacuation System Based on Artificial Intelligence of Things to Support Nuclear Facility Systems (in session "Student Competition")

Harnessing Energy Potential from High-Level Nuclear Waste (in session "Fuel Cycle and Waste Management")

Heat transfer enhancement by infrared thermography analysis in two different corrugated profile (in session "Thermal Hydraulics")

Heat-only Small Modular Reactors for District Cooling and Water Desalination: Saudi Arabia Case Study (in session "Nuclear Applications and Radiation Processing")

Heterogeneous Core Simulation of the MSRE Using a CAD Model and High Density Moderator in OpenMC (in session "Student Competition")

High-Fidelity Transient Simulation of Reactivity-Initiated Accident Scenarios in SPERT III-E Reactor Using Coupled Serpent-SUBCHANFLOW Scheme (in session "Student Competition")

High-Fidelity Velocimetry Experiments and Spatial-Temporal Flow Analyses in a Randomly Packed Pebble Bed Arrangement (in session "Thermal Hydraulics")

HTGR core simplified modelling with Monte Carlo code (in session "Student Competition")

Hydrogen Build-Up Mitigation in Nuclear Reactor Vessels (in session "Student Competition")

IAEA NUCLEAR POWER PLANT SIMULATORS FOR EDUCATION AND TRAINING (in session "Education and Training")

Imaging of hypoxia in colorectal cancer and gastroesophageal cancer with positron emission tomography (in session "Nuclear Applications and Radiation Processing")

Impact of Coconut Shell Ash on the Gamma Radiation Shielding Properties of Borotellurite Glass System (in session "Student Competition")

Impact of Monte Carlo Calculations on Design, Activation and Inventory Analysis, Safety and Radiation Protection of Nuclear Power Plants (in session "Poster")

Impact of Nonzero Initial Heat Flux Increase on Pool Boiling Curves: A Transient Versus Stationary Comparison (in session "Thermal Hydraulics")

Industrial Waste As a Secondary Source of Rare Earth Elements for Nuclear Fuel Applications (in session "Student Competition")

Influence of Buoyancy in a Mixed Convection Liquid Metal Flow for a Horizontal Channel Configuration (in session "Poster")

Influence of Dynamic Strain Aging (DSA) on Tensile Behavior in FeCrAl APMT® Alloy (in session "Student Competition")

Influence of Heat Treatment on the Structure and Properties of Passive Films in Flow-Accelerated Corrosion of Low-Alloy Steel (in session "Nuclear Materials")

Influence of temperature dependent material properties on natural convection in a square differentially heated cavity (in session "Thermal Hydraulics")

Innovative Microreactor For Sustainable And Localized Medical Isotopes Production (in session "Poster")

Innovative Radiation Leak Detection and Analysis Using Intelligent Sensors and Spectroscopy. (in session "Poster")

Integration of Nuclear Turbine Exhaust with Spiral Wound Membrane Distillation Systems (in session "Student Competition")

Investigating cesium's relative bioavailability and bioaccessibility in contaminated concrete following single-dose exposure (in session "Student Competition")

Investigating the Applicability of Neural Operators for Severe Accident Analysis (in session "Safety and Severe Accidents")

Investigating the Potential Use of Different Adsorbents to Mitigate Soil Contamination (in session "Nuclear Applications and Radiation Processing")

Investigation Of Detection Performances Of Cadmium Zinc Telluride (CdZnTe) Radiation Detectors By Doping With Se,In,Bi, and Pb (in session "Student Competition")

Investigation of VVER-1200 Under Steam Line Break Containment and Partial Turbine Failure (in session "Safety and Severe Accidents")

Invited Talk: Challenges and Advancements in Multiphysics Simulation of Nuclear Energy Systems (in session "Reactor Physics")

Invited Talk: From compliance to competence: How Nuclear Safeguards education is changing the nuclear workforce paradigm (in session "Education and Training")

Invited Talk: Heat removal challenges in the divertor of nuclear fusion reactors (in session "Fusion and Advanced Reactors")

Invited Talk: Key Outcomes of Recent NEA Nuclear Safety Joint Projects in Thermal- and future innovation (in session "Thermal Hydraulics")

Invited Talk: Nuclear material and Long Term Operation of nuclear facilities (in session "Nuclear Materials")

Invited Talk: Polish Advanced Modular Reactor HTGR-POLA: basic applications on land, and possible extensions at sea and in space (in session "Fusion and Advanced Reactors")

IONOPTICAL CALCULATIONS OF KACST ANALYZING MAGNET SYSTEM FOR HEAVY MOLECULAR IONS (in session "Nuclear Applications and Radiation Processing")

Irradiation Dose and Temperature Effects in Tungsten Carbide Fusion Reactor Shielding (in session "Student Competition")

Irradiation History Reconstruction for Pebble-Bed HTGR Based on Generalized Reinforcement Policy Optimization (in session "Fuel Cycle and Waste Management")

Irradiation-assisted corrosion in structural alloys: advances, challenges, and future directions (in session "Nuclear Materials")

KE-100: Pressurized Water Cooled Small Modular Reactor Benchmark (in session "Fusion and Advanced Reactors")

Leak Prevention Strategies for Spent Fuel Pools: A Comparison-Based Study of Pool Design Technologies (in session "Fuel Cycle and Waste Management")

Life Cycle Assessment of the Barakah Nuclear Energy Plant: Nuclear Contribution to UAE Net-Zero Goal (in session "Fuel Cycle and Waste Management")

Lightweight and Lead-Free Radiation Shielding: LDPE Composites Reinforced with Cement and Bismuth Oxide (in session "Student Competition")

Load-Following Control of a VVER‑1000 Reactor Using a Takagi-Sugeno Fuzzy PID Sliding Mode Composite Controller Based on a Validated Nonlinear Multipoint Kinetic Model via Lyapunov Approach (in session "Student Competition")

Loss of Flow Transient Analysis of a Small Modular Reactor during Normal Operation (in session "Poster")

Market Assessment and Cogeneration Potential of High-Temperature Gas-cooled SMRs for Green Steel Production in Saudi Arabia (in session "Nuclear Applications and Radiation Processing")

Mechanical Degradation Through Tribological Wear in Sleeveless SiC-Matrix HTGR Fuel Compacts Induced by Dual Helium Cooling Vibrations (in session "Safety and Severe Accidents")

Microbiology in nuclear waste disposal: Microbiologically influenced corrosion of nuclear waste canister materials (in session "Fuel Cycle and Waste Management")

Mineralogical Controls on Radiological Impact in Pegmatites Rocks of Eastern Desert, Egypt: Implications for Mining Safety and Radiation Protection (in session "Nuclear Materials")

Modeling Impact of Roughness and Wettability on Critical Heat Flux Predictions (in session "Poster")

Modelling the Consequences of SGTR Accident Scenarios in a Typical PWR with the MELCOR Code (in session "Student Competition")

Monte Carlo Simulation for Performance Analysis of a ²⁵²Cf-Driven PGNAA Landmine Detection and Identification System (in session "Poster")

Monte Carlo Simulation of Prompt Gamma Neutron Activation Analysis (PGNAA) for Formation Porosity Measurement in Nuclear Well Logging (in session "Nuclear Applications and Radiation Processing")

Multi-Criteria Decision Analysis for Selecting the Optimal Gen-IV Small Modular Reactor for Saudi Arabia (in session "Student Competition")

Multi-Objective Optimization of APR-1400 Core Reload Pattern using Metaheuristic Algorithm (in session "Reactor Physics")

Multiphase Fluid Flow In Nuclear systems (MULTIForm) Facility: Current research in the hydrotransport loop (in session "Fuel Cycle and Waste Management")

Neutronic Analysis of the SMART Core (in session "Reactor Physics")

Neutronic Evaluation of Reprocessed GANEX/UREX+ Fuels Spiked with Depleted Uranium in SMART Reactor (in session "Fuel Cycle and Waste Management")

Neutronic Feasibility Study of Dual-Cooled Annular Duplex PuO2-ThO2 Fuel for Next-Generation PW-SMRs: Assembly Level Analysis (in session "Fusion and Advanced Reactors")

Neutronic Modelling of a Low Power Research Reactor Using OpenMC (in session "Fusion and Advanced Reactors")

New functionalization of –N and –S groups in chitosan/Moringa oleifera hydrogel beads enhances the complete and selective removal of uranium and their application in seawater. (in session "Nuclear Applications and Radiation Processing")

Nuclear Power as a Critical Link in Energy Transition: Comparative Prioritization for a Low-Carbon Future (in session "Education and Training")

Nuclear Power Plants as a Sustainable Power Source for Electric Vehicle Transition in Saudi Arabia: A Comparative Life Cycle Assessment of Environmental Impacts (in session "Nuclear Applications and Radiation Processing")

Nuclear Radiation attenuation and Elasto-Mechanical Properties of La2O3 based Boro-Silicate Glasses: Comparative Analysis (in session "Nuclear Applications and Radiation Processing")

Nuclear Steam Cogeneration Industrial Growth (in session "Student Competition")

Nuclear Steam Cogeneration Industrial Growth (in session "Poster")

Numerical activities using STH codes to support the WCLL BB in-box LOCA experimental campaign for fusion reactors safety (in session "Fusion and Advanced Reactors")

Numerical Evaluation of RANS Turbulence Models for Flow-Accelerated Corrosion (in session "Poster")

Numerical Evaluation of Turbulent Mass Transfer in Separated Flows for the Prediction of Flow-Accelerated Corrosion (in session "Student Competition")

Numerical Evaluation of Turbulent Mass Transfer in Separated Flows for the Prediction of Flow-Accelerated Corrosion (in session "Thermal Hydraulics")

Numerical Investigation of Heat Transfer from Tube Banks to Simulate Secondary Loop in Small Modular Reactor (in session "Student Competition")

Numerical Modelling of Flow Induced vibrations in Nucelar fuel rods (in session "Student Competition")

Numerical Prediction of Mixed Convection Flow Regime in Liquid-Metal Fast Cooled Reactor Design (in session "Poster")

Numerical study of 3He, BF3, and NaI Detectors using compensated neutron log method for porosity measurements at the abandoned well of limestone formation for potential deep borehole disposal candidate (in session "Fuel Cycle and Waste Management")

Optimization of Flow Uniformity in a 300 MWth Molten Salt Reactor for Coal Plant Repowering Using CFD (in session "Student Competition")

Optimization of Radiation Shielding in TNG-40 Using Machine Learning-Enhanced Monte Carlo Simulations (in session "Student Competition")

Optimization of the ionization chamber structure for nuclear radiation measurement system (in session "Student Competition")

Optimizing COFs Properties for Uranium Uptake: The Role of Alcohol in Aqueous Precipitation (in session "Fuel Cycle and Waste Management")

Optimizing Neutronics and Thermal Performance in High-Temperature Gas-Cooled Reactors (in session "Poster")

Optimizing the Medical Cyclotrons in Saudi Arabia: From Installation to Decommissioning (in session "Nuclear Applications and Radiation Processing")

Passive Containment Cooling System Modelling with APROS System Code (in session "Thermal Hydraulics")

PEBBLE BED RACTOR DESIGN DEVELOPMENT FOR INDONESIA (in session "Reactor Physics")

Performance study of spent radioactive resin conditioning using cementitious binders incorporating clay (in session "Poster")

Polyphosphate mesoporous silica nanoparticles performance for adsorption of Uranium in aqueous solutions (in session "Nuclear Materials")

Predicting Urban Pollutant Spread from Accidental Releases: A Turbulence Modeling Perspective (in session "Safety and Severe Accidents")

PREDICTION OF FLOW AND HEAT TRANSFER IN A MOLTEN CORIUM POOL (in session "Poster")

Prediction Of The Effective Multiplication Factor Of The Fuji-U3 Molten Salt Reactor Using Artificial Neural Networks Based On Monte Carlo Simulations With OpenMC (in session "Student Competition")

Prediction of turbulent heat transfer using Physics Informed Machine Learning (in session "Thermal Hydraulics")

Predictive Modelling of Hydrogen Releases from Nuclear Waste Pipelines: A Collaborative Study with Sellafield Ltd (in session "Poster")

Predictive modelling of small scale hydrogen explosion overpressures related to hydrogen releases from nuclear containment systems: A Collaborative Study with Sellafield Ltd (in session "Poster")

Preliminary results for the C5G7-2D Pin cells using the QUANTRA code (in session "Reactor Physics")

Preliminary Risk Assessment of Nuclear-Integrated Hydrogen Systems (in session "Student Competition")

Preliminary Thermal-Hydraulic Assessment of Iron-Based ATF Claddings with Reduced Thickness (in session "Poster")

Pressurized Thermal Shock in Pressurized Water Reactor (in session "Student Competition")

Probabilistic Model Chain Methodology for Radiological Risk Assessment in SMR Reactors: A Site-Specific Approach for Enhanced Nuclear Safety and Emergency Planning (in session "Safety and Severe Accidents")

Process Intensification for Radioactive Wastewater Treatment: Efficient Pb²⁺ and Cu²⁺ Removal Using an Agitated Tubular Reactor (in session "Fuel Cycle and Waste Management")

Project Management Strategies for Managing Low to Moderate Nuclear Incidents in Saudi Arabian Nuclear Power Plants (in session "Student Competition")

PWR fuel assembly burnup with and without thorium addition (in session "Reactor Physics")

Radiation Attenuation Properties for different Aluminuim Alloys (in session "Safety and Severe Accidents")

Radiation Attenuation Properties for different Aluminuim Alloys Poster (in session "Poster")

Radiation Shielding Analysis of Disused Sealed Radioactive Sources (DSRS) Transport Container Design of "Gama Container" Using MicroShield and PHITS Software (in session "Safety and Severe Accidents")

Radiation-induced modification of the properties of starch:PVA and starch:PVA:cellulose nanocrystals films composition. The effect of the starch component (in session "Student Competition")

Radioactivity in Camel Milk in Saudi Arabia (in session "Poster")

Radioecological Parameters for Emergency Preparedness (in session "Safety and Severe Accidents")

Radiological Hazard Assessment and Health Implications due to Soils of Medicinal Plants in Peninsular Malaysia (in session "Nuclear Applications and Radiation Processing")

Radiological impact of Cs-137 release from the near surface disposal facility at Serpong Nuclear Center to environment: Effect of compacted bentonite layer (in session "Poster")

Radon Exhalation Rates and Dose Assessment from Some Marble and Granite Used in Saudi Arabia (in session "Nuclear Applications and Radiation Processing")

Reactor Response to Step Reactivity Changes (in session "Poster")

Regulatory Overview of the Accelerators Used to Produce Radioisotopes in Belgium (in session "Nuclear Applications and Radiation Processing")

Reinforcement Learning-Based Optimization of NuScale Power Module Fuel Assembly Design Using Proximal Policy Optimization and CASMO Neutronics Simulation (in session "Fusion and Advanced Reactors")

Reinforcement Learning-Based Optimization of NuScale Power Module Fuel Assembly Design: A Novel Physics-Informed Approach Using Proximal Policy Optimization (in session "Student Competition")

Relationship Between 3D Printing Direction and Gamma Radiation-Shielding Performance (in session "Student Competition")

Research Gaps and Strategic Opportunities in High Integrity Container Technology for Radioactive Resin Waste in Developing Countries (in session "Student Competition")

Risk Evaluation of the Decontamination Process of Radioisotope and Radiopharmaceutical Production Installations Using Analytic Hierarchy Process (AHP) Machine Learning (in session "Safety and Severe Accidents")

Risk Management in the Revitalization of the Radioisotope and Radiopharmaceutical Technology Facility: FTA and HAZOP Methods for Risk Identification and Monte Carlo Simulation for Contingency Cost Estimation (in session "Safety and Severe Accidents")

Robust Model Identification for Pressurized Water Reactor Systems using Sparse Identification of Nonlinear Dynamics (in session "Reactor Physics")

Role of Nuclear Power in the Race to Net Zero Target: A Case Study of Bangladesh’s Upcoming Rooppur Nuclear Power Plant (in session "Nuclear Applications and Radiation Processing")

RVE Analyses of Zirconium Alloy with Hydride Inclusions under Varing Temperature Conditions (in session "Student Competition")

Safety assessment of interim disposal facility in KFUPM area for low- and intermediate-level radioactive waste (LILW) repository using RESRAD-OFFSITE code (in session "Poster")

Safety Assessment of Interim Disposal Facility in King Fahd University for Petroleum and Minerals (KFUPM) Area for Interim Storage of Low- and Intermediate-level Radioactive waste (LILW) (in session "Poster")

Salt Selection Study For Molten Salt Reactor Design In Saudi Arabia's Energy Mix (in session "Poster")

Seismic Response Calibration of a Scaled CPR1000 Prestressed Concrete Containment Vessel Using ABAQUS (in session "Safety and Severe Accidents")

Simulation Analysis of the flow characteristics during Solidification process of PCM (in session "Student Competition")

Simulation of hBN/HDPE Composites for 2.5 MeV Neutron Shielding Using GEANT4 (in session "Nuclear Applications and Radiation Processing")

Simulation of HTRF experiments with CTF subchannel code (in session "Thermal Hydraulics")

Simulation of Relevant Transient Scenarios for a lead-cooled Reference SMR using a STH Code (in session "Thermal Hydraulics")

Simulations and experiments of severe accident transients in a generic SMR containment: Expanding the THAI+ test facility with a new vessel (in session "Safety and Severe Accidents")

Site Study for Long-term Storage and Integrated Disposal Facility in the Jawa Island Indonesia (in session "Fuel Cycle and Waste Management")

Social Acceptance of Nuclear Power: Insight from Qualitative Interviews in Bangladesh (in session "Nuclear Applications and Radiation Processing")

Solid-Liquid Separation of Radwaste Suspensions Using Polyacrylamide Flocculation Agents (in session "Student Competition")

Stability optimization and dynamic analysis of active magnetic bearing rotor system in mobile micro-reactor (in session "Fusion and Advanced Reactors")

STH/CFD Codes Applications to Compact Crossflow HXs (in session "Thermal Hydraulics")

Stimulating IFN-β Production in Glioblastoma Through Proton Beam-Induced cGAS–STING Activation: A Monte Carlo Study (in session "Nuclear Applications and Radiation Processing")

Strengthening Nuclear Competence: Education and Training Pathways for Sustainable Technological Progress (in session "Education and Training")

Stress Analysis of Inlet Cross-Flow Fitting Component for the Canadian SCWR Concept (in session "Fusion and Advanced Reactors")

Synthesis and Characterisation of Ce-doped Zirconolites Formed by Reactive Spark Plasma Sintering (in session "Student Competition")

Taylor Bubble in Laminar Vertical Counter-Current Flow as CFD benchmark case (in session "Thermal Hydraulics")

Techno-Economic Analysis of Nuclear-Based Hydrogen Production: A Case Study Approach Using HEEP (in session "Poster")

Techno-economic Analysis on Converting Retiring Coal Plants into Nuclear (in session "Student Competition")

Technoeconomic analysis of High Temperature Gas-cooled Reactors for industrial steam production based on Levelized Cost Assessment and multi-agent trading simulations (in session "Fusion and Advanced Reactors")

The application of SMRs for seawater desalination as a source of potable water in the Kingdom of Saudi Arabia (in session "Student Competition")

The Applications of the Saudi Low Power Research Reactor (LPRR) in Supporting the National Nuclear Infrastructure Milestones (in session "Research Reactors")

The challenges, opportunities and future outlooks of current underground research facilities for deep geological nuclear waste disposal: A review study (in session "Fuel Cycle and Waste Management")

The Contribution of Nuclear Energy to Accelerating Progress towards Low-Carbon Energy (in session "Nuclear Applications and Radiation Processing")

The Data-DrivenReduced Order Modelling Framework: Application on the DYNASTY Experimental Facility (in session "Thermal Hydraulics")

The Development of Nuclear Core Management Optimization Codes for Innovative Small Modular Reactor i-SMR (in session "Student Competition")

The Effect of Control Rod Position On Control Rod Worth In Gama Micro Space Reactor (in session "Student Competition")

The planning strategy of robotics technology for revitalizing nuclear facility: a review (in session "Safety and Severe Accidents")

The Prospect of Using Advanced HALEU & TRISO Fuels in Advanced Nuclear Reactors (in session "Poster")

The role of high frequency intermittent field to control CHF accident in water cooled nuclear reactors (in session "Poster")

The role of small modular reactors in hybrid electricity systems to achieve a circular carbon economy (in session "Student Competition")

Thermal Analisys of the Dual-Cooled Lead-Lithium Blanket in a Fusion System (in session "Student Competition")

Thermal fatigue in T junction dead leg flows (in session "Poster")

Thermal Hydraulic Characteristics of Advanced Reactor Fuels: An Analysis of MOX, TRISO, and Metallic Fuels (in session "Poster")

Thermal investigation of turbulent flow inside a square duct using heated foil sensors (in session "Poster")

Thermal Performance Modeling of Deep Geological Repositories for High-Level Nuclear Waste in Bangladesh (in session "Student Competition")

Thermoluminescence and Structural Characterization of Natural Flake Graphite Under 6 MV Photon Exposure from Medical LINAC for Dosimetric Applications (in session "Nuclear Applications and Radiation Processing")

Thorium Fuel Designs for Enhanced Performance in Micro Modular High Temperature Reactor (in session "Poster")

Towards a Self-Reliant Nuclear Future: An Analysis of Saudi Arabia's Potential in Localizing Nuclear Power Plant Equipment Production (in session "Poster")

Truly Sustainable Nuclear Reactor System with Cost-effective and Proliferation-resistant Closed Fuel Cycle (in session "Keynote Speech")

Tunable Sulfur Vacancies in Amorphous-crystalline AC-Bi2S3-x@C Derived from CAU-17 for Efficient Capture of Radioiodine: Comparison of Sulfur Vacancies in Amorphous and Crystalline Structures (in session "Fuel Cycle and Waste Management")

Understanding Microbial Corrosion in Spent Fuel Pools through Bibliometric Trends and Microbiological Evidence (in session "Fuel Cycle and Waste Management")

Using Universal Machine Learning Interatomic Potentials for Irradiation Damage Modeling in RAFM Steels for Fusion Applications (in session "Fusion and Advanced Reactors")

Vacuum Chamber Integration at Reactor Beam Ports for Space Research (in session "Research Reactors")

Validation of OpenMC for Gen IV Graphite-Moderated Reactors: Insights from Benchmarking the UFTR (in session "Reactor Physics")

Verification of CUPID-MSR for Molten Salt Nuclear Reactor Fluid Design (in session "Student Competition")

Why Artificial Intelligence Is Beneficial For Low Intermediate Level Waste Management for Long-Term Sustainable Near Surface Disposal Design: Enhancing Groundwater Monitoring Using Time Series Forecasting (in session "Fuel Cycle and Waste Management")

Wind Profile Analysis in TRIGA Bandung Nuclear Installation by Machine Learning as Site Safety-Related Decision-Making Resources (in session "Student Competition")

“Neutron Imaging for nuclear and radiological security in Bangladesh” – Prospects and Possibilities (in session "Student Competition")

THE SECOND SAUDI INTERNATIONAL CONFERENCE ON NUCLEAR POWER ENGINEERING (SCOPE-2)

Contact

Material Package